Cooling and noise

Cleaning Your PC's Dust Filters

5 minsEasyTools neededVideo coming soon

Cleaning your dust filters regularly is an important part of looking after your PC. The filters stop dust getting inside, which is key to keeping it cool.

Dust filters are usually mesh, and most are magnetic or slide in, so they're easy to remove and clean.

Tools needed

  • Compressed air
  • Soft brush

Why clean your dust filters?

Clean dust filters bring plenty of benefits:

  • Prevent overheating and improve efficiency: with clean filters, air flows properly, which stops your PC overheating and keeps it running efficiently.
  • Maintain performance and reduce noise: your cooling works at its best, so the fans don't need to work as hard and run more quietly.
  • Extend component lifespan: stopping dust and debris getting in protects sensitive components, so they last longer and are less likely to be damaged.
  • Improve system stability: a clean PC is less likely to suffer thermal throttling and performance issues, so it runs reliably and smoothly.

Desktop PCs

  1. Step 1 of 3

    Remove the filters

    Take the filters out carefully. Most are magnetic and come straight off, while some slide out instead. It depends on the design. Look for them in these places:

    • Front: often sits behind the front panel.
    • Top: normally fitted to the case's top panel, over the radiator or top-mounted fans.
    • Bottom: often under the case, covering the intake for the power supply and, in some cases, the bottom intake fans.
  2. Step 2 of 3

    Clean the filters

    Take the filters outdoors so the dust doesn't spread through your home.

    Clean them gently using compressed air in a can, a soft brush or something similar, until there's no dust or debris left.

    WarningDon't use water or cleaning products, as they can damage the filters.
  3. Step 3 of 3

    Refit the filters

    When the filters are dry and clean, fit them back where they came from.

Laptops

  1. Step 1 of 3

    Power off and get ready

    Check that your laptop is fully switched off and disconnected from all power sources.

    Have a can of compressed air ready.

    WarningAvoid vacuum cleaners. They can create static electricity, which may damage the components inside your laptop.
  2. Step 2 of 3

    Find the air vents

    On most laptops you'll find air vents on the bottom, sides and back. They let cool air in and hot air out, which helps keep the laptop's internal temperature stable.

  3. Step 3 of 3

    Clean the vents

    Keep the compressed air can upright and send short bursts into the vents to loosen any dust or debris that's collected inside.

    Ideally, do this outside or somewhere well ventilated so the dust doesn't spread indoors.

    Go over every vent, repeating as needed until no dust or debris remains.

    WarningKeep some distance between the can and the vents. Blasting them with too much force can make the fans spin too fast and could damage them.

What's next?

When you've finished cleaning the dust filters and air vents, put your PC or laptop back together and check that everything is connected properly. Clean filters help maintain good airflow and cooling, and help your components last longer. For more maintenance, try this guide.

This guide can help with

Need a hand?

If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.