First things first: thank you so much for your purchase. We really appreciate it.
This guide covers everything you need to get your new PC out of the box and up and running.
Video coming soon
We're filming a walkthrough for this guide. In the meantime, the steps below cover everything you need.
Unbox your PC
1
Step 1 of 4
Open the box
To set up your PC for the first time, carefully remove all the packaging from the outside and inside of the computer.
TipKeep all of your packaging.
2
Step 2 of 4
Lift the PC out
This step may be easier with someone helping you. Be careful not to drop the PC, particularly if it's a heavier build.
Use the cutouts in the white foam to get a better grip as you lift it.
3
Step 3 of 4
Unwrap and check for damage
Remove the protective wrap and set the PC on a flat, stable surface with room behind it for cables.
Before you go any further, take a moment to check the outside of the case for any damage from shipping.
4
Step 4 of 4
Remove the side panel and foam
To protect your PC on its way to you, we fill the inside with removable foam. You'll need to take off the side panel to get to it.
Each case opens a little differently. Some have four screws holding the glass panel in place, others are held by screws at the back, and some swing open on a hinge.
Take out all the foam from inside the case and keep it.
Connect everything
1
Step 1 of 3
Gather your accessories
Your PC comes with a small plastic bag of spare parts. The only things you need from it are the power cable and the Wi-Fi antenna (if your PC has one).
Everything else is spare. You won't need it unless you're installing extra storage or components, so keep it somewhere safe in case you do later.
If your power supply came with a pouch, we'll have used it to store the spare parts. Wi-Fi antennas come in a couple of different forms, depending on your motherboard.
2
Step 2 of 3
Connect the power cable and Wi-Fi antenna
First, make sure the switch on the power supply (PSU) is set to "O" (off).
Then connect the included power cable and the Wi-Fi antenna (if your PC has one). Make sure the power cable is pushed in fully at both the PSU and a reliable power point, and that the antenna is fastened tightly.
3
Step 3 of 3
Connect your display and peripherals
Your monitor goes into the graphics card, using either DisplayPort or HDMI. Choose the graphics card's lower ports, found at the PC's rear, and avoid the top section, because those top ports belong to the motherboard.
For a wired internet connection, connect the ethernet cable to the back of the PC. Then connect the rest of your peripherals.
Lastly, switch the power supply to "I" (on) and press your case's power button.
Start up your PC
1
Step 1 of 2
Turn it on and log in
If you bought a Windows licence with your PC, all your drivers, settings and software are already installed, so there's nothing else for you to do. If you're asked for a password when you log in, just press Enter without typing one.
If you bought your PC without an operating system, install the OS of your choice, then install your motherboard and graphics card drivers.
2
Step 2 of 2
Ready to go
Once you reach the desktop, you're all set. Time to start downloading your favourite games and apps.
That's the whole setup. Enjoy your new build!
What's next?
Your PC is ready to go. If anything goes wrong or you need help, please contact us. We're glad to help.