Getting started
Fix RGB Lighting That's Out of Sync
5 minsEasyTools neededVideo coming soon
Tools needed
- Phillips screwdriver
Video coming soon
We're filming a walkthrough for this guide. In the meantime, the steps below cover everything you need.
Why reset and resync the hub?
Resetting and resyncing your RGB hub
-
Step 1 of 4
Remove the side panel
Good to knowThe hub only syncs while your PC is switched on. -
Step 2 of 4
Locate the RGB hub and its bridging pins
Good to knowSome builds have two hubs. -
Step 3 of 4
Bridge the pins
TipHolding the screwdriver on the pins for 5 seconds or longer can turn the RGB off. To turn it back on, bridge the pins once more for 5–10 seconds. -
Step 4 of 4
Check the lights have changed
What's next?
Inside the caseCheck the Cables Inside Your PCCheck that every cable inside your PC is fully and correctly seated, from the main power cables to drives and fans.5 minsEasy
Quick checksPower Cycle Your PC to Clear Temporary FaultsPower cycle your PC properly to drain leftover power and clear common temporary faults.5 minsEasy
This guide can help with
RGB control software clashes with other software on my PCRGB control software clashes with other software on my PCRGB software clashes with other system softwareCan't control RGB on new hardware because the software isn't compatibleRGB software can't find connected RGB devicesLost RGB control after system updates or driver conflicts
Related guides
Getting startedSetting Up Your New Nebula PCEverything to do when your Nebula PC arrives, from opening the box to your first boot.15 minsEasy
Getting startedOpen-Loop PC Setup and Care GuideEverything you need to unpack, set up and look after your new Nebula open-loop water-cooled PC.30 minsEasyTools needed
Need a hand?
If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.