BIOS

Replace a Flat CMOS Battery

5 minsEasyTools neededVideo coming soon

There are a few reasons the CMOS battery on your motherboard might need replacing. Typical signs include your PC forgetting its time or date settings, or error messages like "CMOS Read Error", "CMOS Checksum Error", "CMOS Battery Failure" or "System battery voltage is low."

If any of these sound familiar, you probably need a new CMOS battery.

Tools needed

  • Replacement CMOS battery

Battery safety

WarningThere's a lithium button/coin battery in this product. If it's swallowed or put in any part of the body, severe or fatal injuries can happen within 2 hours. Store new and used batteries well out of children's reach. If you suspect someone has swallowed a battery or placed one in any part of their body, get medical attention immediately. For fast expert advice, call 13 11 26 to reach the Australian Poisons Information Centre (24/7).

How to replace the CMOS battery

WarningBe careful when handling the CMOS battery, and guard against electrostatic discharge (ESD) while you work inside your PC.
  1. Step 1 of 4

    Find your CMOS battery

    Open the case, then find the motherboard's CMOS battery. The method depends on your chassis, but usually two screws hold the glass side panel on.

    Most PCs now have a coin cell CMOS battery, like a CR2032.

    WarningA metal clip or bar holds some CMOS batteries in place. Don't bend the clip, otherwise the new battery may not stay secure in the socket.
  2. Step 2 of 4

    Check the battery details

    Make a note of the current battery's specifications, such as its voltage, wiring and chemistry, because these can differ from one motherboard to another.

    If you're unsure, take the battery out and have a retail store identify it, or contact us and we'll help.

  3. Step 3 of 4

    Remove the old battery

    For a coin cell battery held by a clip on your motherboard, press the clip while you pull the battery out to free it from the socket.

    Good to knowSome CMOS batteries can't be removed. If yours is one of them, contact our team, check your documentation, or ask the manufacturer for guidance.
  4. Step 4 of 4

    Insert the new battery

    When you have the replacement battery, put it in the socket facing the same way the old one did.

What's next?

With the new battery in, your PC should hold its time, date and BIOS settings again.

This guide can help with

Need a hand?

If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.