Inside the case

Check and Reseat the GPU Riser Cable

10 minsIntermediateTools neededVideo coming soon

Think the riser cable could be behind your GPU problems? Don't worry. This guide explains how to check the GPU riser cable and reseat it, all while the GPU stays in place.

Tools needed

  • Screwdriver
  • Anti-static wrist strap (optional)

Why reseat your GPU riser cable?

Reseating the riser cable can help with:

  • Inconsistent performance: can fix frame rate drops and stuttering.
  • Display issues: can fix signal loss, artefacts and screen tearing.
  • System instability: can stop random crashes and reboots.
  • No GPU detection: helps your system recognise the GPU.
  • After moving your PC: confirms the connections are still secure after your PC has been moved.

How to check and reseat the riser cable

  1. Step 1 of 5

    Prepare the PC

    Fully shut down your PC. Pull the power cable out of the wall socket or powerboard, then disconnect all your peripherals (mouse, keyboard, monitor and so on).

    Undo the side panel screws with your screwdriver, then gently lift the panel away so you can reach inside.

    TipIf you own an anti-static wrist strap, wear it and clip it onto a grounded metal surface. If not, regularly touch some bare metal on your case to release any built-up static electricity.
  2. Step 2 of 5

    Find and inspect the riser cable

    Locate your GPU, then find the riser cable linking it to the motherboard's PCIe slot. In most PCs it's a flat, bendable ribbon-style cable.

    Look over the cable for signs of damage, like cuts, kinks or bent pins, and make sure it's firmly connected at both ends: the GPU and the motherboard.

  3. Step 3 of 5

    Reseat the motherboard end

    To free the cable, push the PCIe retention clip inwards, towards the motherboard.

    Carefully draw the riser cable's connector out of the motherboard's PCIe slot.

    Align the connector with the PCIe slot and press it in gently until it's firmly seated. Check that it goes in straight and fully.

    WarningTo avoid damaging the riser cable, always grip the connector rather than pulling on the cable.
  4. Step 4 of 5

    Reseat the GPU end

    Holding the connector rather than the cable, gently unplug the riser cable at the GPU end.

    Align the riser cable's connector with the GPU's PCIe connector and press it in gently until it's firmly seated. Check that it goes in straight and fully.

    If screws hold your GPU in place, put them back so the card is secure. This keeps the GPU from shifting and the connection stable.

  5. Step 5 of 5

    Power up and test

    Put the side panel back on and tighten the screws. Plug the power cable back in and reconnect all your peripherals.

    Switch on your PC and confirm the GPU is working correctly. Next, try something that puts load on the graphics card, like a game or a GPU benchmark, to confirm it's stable and behaving normally.

What's next?

After checking and reseating your riser cable, keep an eye on your PC to make sure the GPU is working properly. If problems continue, contact our support team or try these guides.

This guide can help with

Need a hand?

If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.