Inside the case

Reseat Your CPU (AMD Ryzen and Intel)

15 minsExpertTools neededVideo coming soon

A reseat of your CPU can fix all sorts of issues, from performance problems to boot failures. This guide covers Intel-based and Ryzen (AMD) CPUs. Work through each step carefully and don't rush.

Tools needed

  • Phillips screwdriver
  • Thermal paste
  • Isopropyl alcohol (at least 90%)
  • Paper towel or lint-free cloth
  • Anti-static wrist strap (recommended)
  • Compressed air (optional)

Why reseat your CPU?

Reseating the CPU may help if you have:

  • Boot issues: your PC might not boot if its CPU isn't seated correctly.
  • No power: your PC might not switch on at all.
WarningReseating your CPU means working with delicate parts. Doing it incorrectly will void your warranty or damage your system. Go slowly, and proceed at your own risk. If you're unsure or don't feel comfortable with these steps, get professional help or contact our support team.

Remove the cooler

  1. Step 1 of 4

    Prepare the PC

    Switch off your computer and disconnect every cable, including the power cable.

    Keep the power button held in for 30 seconds to drain any leftover power.

    Take out the side panel screws with your Phillips screwdriver, then put the panel to one side.

    Locate the CPU cooler. In most PCs it's a large fan or heatsink sitting on the motherboard.

    WarningTo discharge static electricity, touch a grounded metal object regularly, or put on an anti-static wrist strap.
  2. Step 2 of 4

    Remove the cooler

    Disconnect the cooler's fan cable from the motherboard, then undo the screws or clips that secure the cooler.

    Lift the cooler away from the CPU with care. If it won't come free, twist it gently to break the seal of thermal paste.

  3. Step 3 of 4

    Clean off the old thermal paste

    Put some isopropyl alcohol on a paper towel or lint-free cloth, then wipe the old thermal paste off the CPU and the cooler.

  4. Step 4 of 4

    Check for damage

    Inspect both the cooler and the CPU for signs of visible damage, like corrosion, burn marks or deep scratches. If you find any damage, contact our support team, as the part may need to be replaced.

    WarningIf you notice any damage, contact our support team, as the hardware may need replacing.

Reseat an AMD Ryzen CPU (AM4 socket)

Follow this section if your Ryzen CPU sits in an AM4 socket. If you have an AM5 or Intel CPU, skip to the next sections.

  1. Step 1 of 3

    Release and remove the CPU

    Release the CPU by lifting the lever next to its socket.

    Gently raise the CPU vertically out of the socket.

  2. Step 2 of 3

    Check the pins

    AM4 CPUs have pins on the bottom. Check them closely. Straighten any bent pins gently with something small, like a mechanical pencil.

    WarningCPU pins snap very easily. Never use much force or leverage on them.
  3. Step 3 of 3

    Put the CPU back

    Match the triangle on the CPU's corner to the triangle on the socket.

    Ease the CPU gently into the socket, then push the lever down to lock it.

Reseat an AMD Ryzen CPU (AM5 socket)

Follow this section if your Ryzen CPU sits in an AM5 socket.

  1. Step 1 of 3

    Release and remove the CPU

    AM5 has a different retention mechanism to AM4. Check your motherboard manual to find out how to release it on your board.

    After releasing it, lift the CPU carefully straight up out of the socket.

  2. Step 2 of 3

    Check the socket

    Instead of pins, AM5 CPUs have flat contact pads, so the pins sit in the socket instead. Check it closely for any damage.

  3. Step 3 of 3

    Put the CPU back

    Match the notches on the CPU to the socket, put the CPU back in, then secure the retention mechanism again.

Reseat an Intel CPU

Follow this section if you have an Intel CPU.

  1. Step 1 of 3

    Release and remove the CPU

    Release the CPU retention bracket by pushing the lever down and outwards.

    Lift the CPU carefully straight up out of the socket.

  2. Step 2 of 3

    Check the socket

    Intel motherboards have their pins in the socket, so inspect it for bent pins.

    WarningIf any socket pins are bent, don't try to fix them yourself. Contact our support team for help.
  3. Step 3 of 3

    Put the CPU back

    Match the notches on the CPU to the socket, ease the CPU gently back in, then fasten the retention bracket.

Refit the cooler

  1. Step 1 of 3

    Apply fresh thermal paste

    Apply a small, pea-sized dab of thermal paste to the centre of the CPU.

  2. Step 2 of 3

    Fit the cooler

    Gently lower the cooler onto the CPU again.

    Fasten it with its screws, alternating between screws to keep the pressure even.

  3. Step 3 of 3

    Reconnect and close up

    Reconnect the cooler's fan cable to the motherboard.

    Put the side panel back on, plug your power cable and peripherals back in, then turn on your PC.

What's next?

After reseating your CPU, keep an eye on your PC to make sure everything is working properly. If the problem comes back, these guides are worth trying next.

This guide can help with

Need a hand?

If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.