Inside the case

Fix Crashes and Boot Problems by Reseating RAM

5 minsEasyVideo coming soon

Reseating your RAM can fix memory-related issues and help your system run smoothly. This guide walks you through removing your RAM sticks and putting them back in properly.

Why reseat your RAM?

Reseating your RAM can help with:

  • Intermittent crashes: RAM that isn't seated correctly can lead to random crashes.
  • Boot issues: a poorly connected RAM stick can stop your PC from booting.
  • Performance problems: properly seated RAM can help your system run more stably and perform better.

It's an easy job that often fixes these problems.

Steps to reseat your RAM

  1. Step 1 of 6

    Prepare the PC

    Shut down your PC the usual way, then disconnect the black power cable at the power supply.

  2. Step 2 of 6

    Remove the side panel

    Take the side panel off your case. The method varies between cases, but you'll usually undo some screws or slide the panel out. If you're unsure, check your case manual.

  3. Step 3 of 6

    Find the RAM

    With the case open, locate your RAM sticks and count how many RAM slots are on your motherboard.

    Each slot uses clips to hold its RAM stick in place. On some motherboards the clips are only at the top. On others, there are clips at both ends.

  4. Step 4 of 6

    Unlock and remove the RAM

    To free the RAM sticks, push each clip downwards in the direction of the motherboard. A click tells you the clips have released from the notches on each stick.

    Gently lift each RAM stick straight out of its slot.

    TipPay attention to the direction the notches on each RAM stick are facing. They can only be fitted one way!
  5. Step 5 of 6

    Reinsert the RAM

    Refit the RAM sticks in the same slots they came from, facing the right way. The notches on each stick only match the slot in one direction.

    Press down firmly on each stick until you hear the clips snap into the notches. When you hear that click, the stick is fully seated.

  6. Step 6 of 6

    Test the PC

    Put the side panel back on, either by tightening the screws or sliding it into place.

    Reconnect the black power cable to the power supply, then switch on your PC and confirm the RAM is working correctly.

What's next?

Once your RAM is reseated, watch how your PC behaves to check whether the problems return. If they do, try these guides next.

This guide can help with

Need a hand?

If you're still stuck or want a second opinion, get in touch. Our team is always happy to help.